How to make a fascinator DIY Guide

Making my own fascinator is something I have wanted to do since they became fashionable attire during the Spring Racing Carnival. I’ve australia free bets offers for racing carnivalnever actually attended the races, but I enjoy the millinery. Before that I always thought that dainty little black veils and dark lipstick looked especially glamorous. So last month I combined the two and made my own fascinator.

Make a fascinator DIY Guide

A fascinator is a headpiece, a style of millinery. The word originally referred to a fine, lacy head covering akin to a shawl and made from wool or lace. The term had fallen almost into disuse by the 1970s


Making a stunning fascinator is very much about strong composition. For some of us this comes naturally, others may find it hard to make it come together. Even if you have an artistic eye, for your first attempt I highly recommend doing a bit of research first. Some of the materials are fragile and don’t take to reworking kindly.

I bought most of mine from Lincraft in October when they became seasonally available. When I decided to buy my materials, the cheaper round base with sewn on slide comb was not available. I had to opt for the more expensive base and separate slide comb, which I sewed on. I already had some sheer ribbon saved from a gift wrapping (see – hoarding stuff for years pays off!), and a small pick of plain black, trimmed feathers.

iris fascinator, $10.99
slide comb, 79c
hat veiling, 35cm at $5.99 a metre, $2.10
flower, $5.99
iridescent black, trimmed feather pick $4.99
total $24.86

While this may seem quite an outlay for raw materials, you will find this is only the starting price for a basic ready made one that isn’t likely to be as well crafted or fancy as one you can make yourself. I estimate I put 4 hours work into mine. To buy one like it would definitely be over $50, and probably closer to $100. Part of the pleasure of such a project of course, is not just the monetary saving but the creative part and knowing you have something at the end that is unique, and made especially for you by you. That is priceless

Look around and see ready made fascinators.
Fashion shops such as Portmans and Sportsgirl, as well as the millinery department of Myer sold them this season. Notice the shape and composition. Some are spikey and architectural, others are softer or fluffier. This will give you a stronger idea about how to compose your own, and what will suit your style.
Think about the style and colour of the outfit you plan to wear it with and decide on a colour scheme. I went for something that will go with a range of outfits rather than one in particular, and my favourite colours. Choose your base first, then have a play around with the assortment of materials until you find a composition that is pleasing to your eye.
The feathers, flowers and etcetera you choose is the star, not the base. Make sure you have enough. I made 6 little fans in burgundy sheer ribbon to provide body, contrast and help break up the shape of the base. It makes a cheap and easy filler, but because it’s gauzy it’s not visually too heavy. Consider your partner if you have one, by avoiding trims such as big, rigid feather quills that may take his eye out!
Construction A fascinator

Hand sewing it all is best, though a little craft glue here and there may also be helpful.
Have a mirror handy throughout the process as you are constructing the fascintor1107fascinator to suit your face.

Check out fascinators online to see how they are worn in terms of placement on the head. In front of a mirror decide where on your head you will wear it. This will help you know how best to sew your slide comb or other hair accessory to the base. Take note of where it is in relation to a facial feature such as the corner of your eye, and draw a simple diagram of this. It will assist the fitting process and ensure consistency.
If you are making a veil this is where it gets fiddly and you can expect to have a few tries before you get the shape just right. Seeing veiled fascinators on the internet and the different ways they can sit is particularly helpful.

Lady Meerkat :

Modern fascinators are commonly made with feathers, flowers and/or beads. They attach to the hair by a comb, headband or clip. They are particularly popular at premium horse-racing events, such as the Grand National and the Melbourne Cup. Brides may choose to wear them as an alternative to a bridal veil or hat, particularly if their gowns are non-traditional.

Fascinators are best attached with a hat pin; however, many contemporary designs feature clips and combs. They are available pre-made (and may be quite expensive if sold by established millinery designers) but are also quite easy and cost-effective to make at home. They are also sold in kit form.

Trim the edges straight. I trimmed mine to each intersection.
In front of the mirror, put the base on your head. Fold the veil so that it wraps around your face. For mine I did a bit of folding at the corners with a little bit of bunching in the middle. The veil material is fine so when it is a little bunched it isn’t very bulky and easily concealed by a feather etc. Once I found the right veil shape I held it in place with my fingers while carefully slipping the base off my head. After lightly sewing it in place, I rechecked the fit and added a few more stitches.*

ascot fascinator chick

With the aid of a mirror I decided how I wanted the main feathery plume to sit. Note how its curve curls around my head, and does not stand up like a cockatoo. That is what makes it classy rather than sassy. Not that there’s anything wrong with sassy but that wasn’t the flavor I was going for.

The trimmed feathers add a bit of volume and textural interest.
They were attached to the main plume with stitching and a bit of craft glue to hold the stitches in place.

Next I added the flower, again with the aid of a mirror, to ensure it sat right when worn. This was stitched and glued to the feathers, which in turn were stitched to the base.
Lastly I made a series of simple mini fans out of sheer ribbon. In addition to colour and contrast they also help conceal the ends of the feathers and the stump of the flower stem. To make them, I carefully folded them like paper fans about 1cm wide, stitched them together when I thought they were thick enough, then snipped them from the length of ribbon (rather than snipping lengths of ribbon then folding them). I quickly sealed the raw ribbon edges with a lighter to prevent fraying. I made about 3, sewed them on then decided I needed about 3 more.

Hope that was helpful
*Hint:If after all of that you find your veil isn’t sitting perfectly you might be able to cheat a little by hooking it into bobby pins in your hair, as I did on one side.
[edit 16/02/08]

australia racing carnival 2009 fascinator
As promised (see comments) a photograph showing just the fascinator, which should make my explanation that little clearer, and the project a little bit more tempting as well!

Thanks to :Lady Meerkat DIY Fascinator – Australia for the Guide to fascinator making

Related Links:

Wedding fascinator Project

http://www.australiansportbetting.com//free-bet-offers

http://www.australiansportbetting.com//tag/fascinator

http://www.australiansportbetting.com//melbourne-cup-winners/all-time-melbourne-cup-winners

WEBSITE RSS FEED

Tags: , , , ,

About the Author ()

Comments (2)

Trackback URL | Comments RSS Feed

Sites That Link to this Post

  1. Melbourne Cup Australian Online Betting open Now!! | November 2, 2013
  1. us old coins says:

    I simply could not depart your website before suggesting that I really enjoyed the usual info a person provide to your guests? Is going to be back continuously to check up on new posts

Leave a Reply

Your email address will not be published. Required fields are marked *